I want to discuss further, a teeny bit more about
photographing my projects for my blog. It seems it is always ever-changing...
This time I want to talk about my camera and stepping away from the
Automatic modes and working in the Manual modes, well one mode in particular…
the AV mode.
I recently took a couple of classes on how to use my digital
camera. I wanted to take all 10 classes,
but they filled up too quickly. ;) So now I have to wait until Fall when the
next classes will be offered.
But in the mean time, I will share with you what I learned in those two little
classes…
First let me back up just a little to tell you what
camera and lenses I use.
I have a Canon EOS Rebel T2i 18.0MP DSLR camera with
18-55mm IS lens. I've had it for at least a couple of years now, but never took it off the Automatic modes.
This is the 18-55mm IS lens (IS means image stabilizer) that comes with the Canon EOS Rebel T2i:
Just days before the class began, my hubby picked up a Canon 50mm lens, aka nifty fifty, for me
while he was away on a trip. I am so loving my
50mm! I would highly recommend this lens. It isn't very expensive (important... hello!!!), and it is a terrific lens. Especially for my needs.
And on a side note, I've been thinking about ordering a Canon EF-S 55-250mm
f/4-5.6 IS zoom lens with our Aeroplan miles.
Now, back to what I want to share with you…
In just those two little camera classes, I learned to step away
from the automatic settings and to actually use the manual ones. I’m not going to kid myself or pretend that I
know everything, because that would be a huge overstatement. I know that I know very little about this
subject, but I do have a thirst to learn more, and as usual, a drive to share what knowledge I have, little as it is.
What I learned was a very basic overview, but it was
enough to give me a little confidence in turning those dials and pressing
those buttons that were literally Greek to me before. I was always scared to change a setting on my
camera thinking that I wouldn’t know how
to get it back to “normal”. Ha! I see now that it wouldn’t have
mattered. I was only using the automatic
modes before, so the camera did all the calculations with the settings
anyways. ;)
Grab your camera, and let's get started! (Use the above two photos for a visual aid.)
·
Let’s start with which manual mode I am using. I
have my camera set to AV mode. It seems to be the most user-friendly for me, with
my minimal knowledge. (I used to take my
project photos with the automatic settings, usually set on Macro.)
The Manual Modes are A-DEP through to CA.
The Automatic Modes are all the ones below CA.
·
Next, let’s discuss White Balance. On my camera,
there is a button on the back side with a WB on it (top of the "circle" with the up arrow on it). Locate it on your camera and press it. You can adjust the white balance depending
upon what your needs are. So if you are
outside, you can change the setting for bright sun, cloudy, shade, or if you are inside under fluorescent lighting, ect, which is
what I have my camera set to for taking my craft photos, you can choose that
setting. Wow, that alone made a huge
difference in the photos I was/am taking.
They aren’t so dark anymore! (There
are some other settings in there, too, I just didn’t list them all.) Snap a couple of pictures with different
settings and see the difference. Another
good one to try is the AWB, which is
automatic white balance. You could try
that one to see if you prefer to use it.
·
Next, let’s discuss the F-stop. This is how wide
your lens opens, which also controls the amount of time the lens stays open
when you take a photo. The longer the
lens is open, the more light is allowed to come into your photo. If it’s open for too little time, your photo
will be dark. If it’s open too long, your
photo may be a white-out, and the longer the lens is open, it will likely be
blurry unless you use a tripod. I also
take my photos in AV mode because it
has the option of stabilization, so your photos are less likely to be blurry. (Some of the other modes likely have that
option, too, but I haven’t learned enough about it yet.) Keep in mind that different lenses have
different amounts of sizes the lenses can open.
To adjust your F-stop, just turn the main dial – on my camera it is located just behind the shutter button (the one you push to take a photo), and it has deep grooves in it. Try out your lens by taking a photo with the
lowest number set on the F-stop, and then take a photo with it set at the
highest number. You will see the
difference. Now, just adjust it to what
your needs are. I have my camera set at f3.5 right now for taking photos of my projects in my craft room.
·
Okay, so you may have heard of ISO before. The ISO is the camera’s sensitivity to
light. The most important thing to know
is that the higher the ISO number, the more grainy the photo you will
take. So it’s best to try to keep your
ISO at or below 1200 if possible. I
currently have mine set at 400 for my craft room. I find I almost don’t need any other special
lighting with these settings. On my
camera, the ISO button is located just behind the main dial we used to adjust the
F-stop.
·
With the AV mode, you can also adjust the exposure compensation. My camera has a AV button with a + (in black) and - (in white) on it. It is located near my viewing screen on the
back of my camera. You will want to
play with this a little too. It can be
used for bright outdoor images (like pictures in the snow), with an exposure
setting of +1 or more. And for darker
photos/subjects (like a black horse), with an exposure setting of -1, for an
example. I currently have my camera set
to the dot (.) just past the +1, for my craft room. So if your photo looks a little washed out,
you can adjust it to pull some color back into your photo.
Well, those are very much just the basics. But it is a good start. The more you play with your camera, the less
scary it will become. J
For a quick overview, this is what my settings are currently
set at for my craft room (keep in mind, that I have a bunch of overhead pot
lights for lighting in that room), and your needs may be very different than
mine (I've written these down and keep them at my photo-taking spot in my craft room):
Manual
Mode: AV
WB: Fluorescent (or AWB)
F-stop: f3.5
ISO: 400
Exp.
Comp: 1+.
Of course, you will need to adjust all these settings for all of your other photography needs, as these ones I have discussed are more specifically for taking indoor photos of my projects for my blog.
I am starting to get a little more comfortable taking photos manually now. Playing with all of my camera's buttons and dials, snapping photos indoors, and outside, with differing lighting, even action shots. If you have difficulty for the first little bit, you can always use your Automatic modes if you can't get your settings right, right? J
Let me know by leaving a comment if you found this post helpful.
*** If you have a different camera, please refer to your user manual to figure out its differences.
*** All above camera and lens photos were found online: here, here, here, and here.
